High Build Primer Upol Etch Primer Automotive Primer RC-D400
1K Primer RC-D400
RC-D400 is fast drying, one pack surfacer.
PHYSICAL PROPERTIES
Specific Gravity1.2-1.3KG/L
Viscosity1100-1200S
IngredientsAlkyd resin, nitro-cellulose, pigments,fillers
ColourGrey putty
PROCESS
Mix Ratio (by volume)1K surfacer RC-D400: 1 part Thinner (RC-X111): 1 part
Pot Life48 hours@20℃
Spray Gun & Air PressureGravity type: 1.2~1.5mm, 4Pa Suction type: 1.4~1.6m, ( Spray 25μm)
Spray Method2 single coating with wet spray (volatilization time of each layer:5 to 10 minutes)
Drying Time30 minutes@20℃, 15 minutes@60℃
SandingBefore spray: P280~P360 by dry sanding After spray: P800~P1000 by wet sanding, P360～P400 by dry sanding
SubstrateOEM paints, steel, putty, eroded primer, alloy primer
Unapplicable SubstrateGalvanized steel, stainless steel, aluminum, wood
Packaging3.6 KG x 4 tins/ctn
Shelf Life1 years
PRECAUTIONS
1.It cannot be used until stirring evenly after open the tin.
2.All Roch® automotive refinish can be knifed on the surfacer.
3.Maximum adhesive force and anti corrosion performance can be available with Roch® two pack middle coating.
Fast drying will be affected if knife too much.
2K Primer Surfacer RC-D480 (Grey)
2K primer surfacer is a fast drying, high build, good adhesion primer. They are suitable for new vehicle parts and repair.
PHYSICAL PROPERTIES
Specific Gravity1.40±0.05KG/L
Viscosity150-180S
IngredientsHydroxy acrlic resign, pigments, fillers,organic solvents
ColourGrey
PROCESS
Mix Ratio (by volume)2K Primer Surfacer (RC-D480): 4 parts Hardener(RC-G270): 1 part Thinner(RC-X110,RC-X111,RC-X112): 1 part *Choose the materials according to the temperature
Pot Life2 hours@20℃
Spray Gun & Air PressureGravity type: 1.2~1.5mm, 4Pa Suction type: 1.4~1.6mm, (Spray 30-50 μm)
Spray Method2-3 single coating to coverage (volatilization time of each layer:5 to 10 minutes)
Drying Time3 hours@20℃,30 minutes@60℃
SandingBefore spray: P180～P400 by dry sanding After spray: P800～P1000 by wet sanding
SubstrateOEM paint,steel surface,Fiber Reinforced Plastics,surface of putty
Unapplicable Substrategalvanized steel, stainless steel
Packaging4 KG x 4 tins/ctn
Shelf Life5 years
PRECAUTIONS
1.2K primer surfacer can be sprayed after sanding and removing the oil and stain on the surface of the putty, epoxy primer, old paints.
2.30μm must be kept after sanding on the intermediate coating layer.Mid-Coat manufacturers
website:http://www.jinweipaint.com/undercoat/